Towertalk
[Top] [All Lists]

[TowerTalk] Soldering Weathered Connections

To: <towertalk@contesting.com>
Subject: [TowerTalk] Soldering Weathered Connections
From: n0ss@earthlink.net (Tom Hammond - N0SS)
Date: Tue, 26 Oct 1999 09:17:05 -0500
Mark N1LO wrote:

>The other handiest spray bottle I keep around is common rubbing 
>alcohol (70% isopropyl alcohol), which makes a great cleaner, 
>degreaser, ahhhh... fire starter and flying insect killer. Set 
>this bottle's nozzle for a stream for pinpoint accuracy....

Another use for which I find isoproply alcohol to be invaluable is
as a lubricant when drilling through aluminum.  It makes the bit
cut cleanly and bite like it's going thru warm butter!!!  Signif-
icantly better/cleaner/faster than when using most other commonly-
used drilling lubricants. The difference is pretty astounding.

I mention this because I'm sure many of us have cursed at the length
of time it sometimes takes when we're drilling thru thick aluminum
plates for boom-to-mast plates, etc.

I wish I could claim originality for this hint, but I got it from 
an old QST, probably 25 or so years ago.

Who'da thunk it?

73 to all,

Tom Hammond   N0SS


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>