Towertalk
[Top] [All Lists]

[TowerTalk] RF Take-Off Angle

To: <towertalk@contesting.com>
Subject: [TowerTalk] RF Take-Off Angle
From: wa3gin@erols.com (Dave Jordan)
Date: Sun, 07 Nov 1999 22:18:29 -0500

Hi Folks,

I've mounted a Butternut HF6V dead center on top of a 40ft by 25ft by
16ft  high steel quonset hut.  Eight foot ground rods every 8ft on both
side of the
building, tied to each other and to the building.

Anyone got a modeling program that can calculate the effect (if any) of
the curved steel building on the take-off angle of the vertical on
80-20m.

thanks,
dave
WA3GIN


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>