Towertalk
[Top] [All Lists]

[TowerTalk] using end caps

To: <towertalk@contesting.com>
Subject: [TowerTalk] using end caps
From: W8JI@contesting.com (Tom Rauch)
Date: Tue, 27 Mar 2001 21:00:05 -0500
> But unless your antenna is located where that noise would be
> objectionable, wouldn't it just be simpler to leave the caps off?
> Every antenna I've seen has element ends that droop at least slightly.
> Wouldn't this drooping allow gravity to work in eliminating water
> inside the element tubes?

If your antenna is whistling and singing, eventually the aluminum 
will work-harden and crack.

It might take a while, but you can count on it happening.
73, Tom W8JI
W8JI@contesting.com 
--
List Sponsor:  ChampionRadio.com - Trylon self-supporting towers, safety
equipment, rigging gear, LOOS tension guages & more!  www.championradio.com
--
-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>