Towertalk
[Top] [All Lists]

[TowerTalk] RE: Bent Mast

To: <towertalk@contesting.com>
Subject: [TowerTalk] RE: Bent Mast
From: n4kg@juno.com (n4kg@juno.com)
Date: Mon, 23 Apr 2001 16:30:50 -0600
Interesting solution !

Did you remove the lower beam before 
you bent the mast over?

Tom  N4KG

On Mon, 23 Apr 2001 16:52:25 -0400 "Ed Wolf" <n3ue@arrl.net> writes:
> Don't know how high the tower is, but.
> I had a similar problem a few years ago on my
> 50 foot tower. What we ended up doing was climbing
> the tower and tossing a "heavy" rope over the top 
> antenna, and coaxing it into position around the
> mast. Then three of us pulled and pulled until
> the mast was pretty much folded over 180 degrees.
> Then we removed the antennas upside down and used
> a gin pole to remove the mast. Really was quite easy.
> 
>  
> Ed Wolf - ars:N3UE - NA40+TR.PA
> http://members.home.net/wolfie132/
> http://www.breezeshooters.net
> http://www.breezeshooters.com
> 
> List Sponsor:  ChampionRadio.com - Trylon self-supporting towers,
> safety equipment, rigging gear, LOOS tension guages & more!
> http://www.championradio.com
> 
> -----
> FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
> 

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

List Sponsor:  ChampionRadio.com - Trylon self-supporting towers,
safety equipment, rigging gear, LOOS tension guages & more!
http://www.championradio.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>