Towertalk
[Top] [All Lists]

[TowerTalk] Tilting Boom Design

To: <towertalk@contesting.com>
Subject: [TowerTalk] Tilting Boom Design
From: thompson@mindspring.com (David L. Thompson)
Date: Mon, 30 Apr 2001 16:37:03 -0400
There have been several tilt a boom designs.  The first was thje W4GL all
driven arrays back in the 50's with tilt a boom design. W4GL may have a lock
on the name at the time.  Hy-gain used a tilt a boom design at one time in
the early Thunderbird beams.  The design was fairly simple just use the
proper hardware for the boom to mast u bolts so that the boom portion tilted
the boom away from the mast so the elements pointed straight up rather than
horizontal.

Wingard the windmill tower people (the owner was a ham listed or shown in
their ads for a time) used a rotary adapter gear so you could tilt the
antennas at the top.  The towers are still standing at most airports in
North America.

We put up a T joint on a telephone pole so you could turn the antennas
upside down to remove.   We found with bigger antennas that it was best to
not turn the T but we had a guy stand on top ot the telephone pole a guide
the antenna into the open of the T.  The T did double duty as a sleeve
bearing and the rotor was mounted on another T below this.  Look in the old
ARRL handbooks and antenna books from the late 50's (the original article
was in a 1956 QST.).

73 Dave K4JRB



List Sponsor:  ChampionRadio.com - Trylon self-supporting towers,
safety equipment, rigging gear, LOOS tension guages & more!
http://www.championradio.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>