Towertalk
[Top] [All Lists]

[TowerTalk] answers re rotor control bulb

To: <towertalk@contesting.com>
Subject: [TowerTalk] answers re rotor control bulb
From: baycock@HIWAAY.NET (Bill Aycock)
Date: Tue, 01 May 2001 19:56:58 -0500
I got lots of answers, fast, and I want to thank all who were so helpful.
The answers did have what I needed, but raised some other questions.- I
will try to answer.
1. the diagram for a HAM iv shows the number as 1819. Where did I get
'1820'? - My diagram simply says 'bulb', and the bulb and two fuses are
lumped in a replacement package. No ID there.  I got the '1820' the
simplest way- off the burned-out bulb.
2. the (probably correct) type 1819 draws 0.04 Amp- the 1820 draws 0.1 Amp.
 I do not know the difference in Lumens. I wonder if that is why it burned
out?
3. there are several sources at a cost of $.55- RS has them listed for
$1.19- In other words, if RS does not have them locally, I guess I will pay
the shipping, which will be much more than the double price from RS.

Much thanks to all
Bill-W4BSG
-
Bill Aycock   ---   Persimmon Hill 
 Woodville, Alabama, US 35776
 (in the N.E. corner of the State)
      W4BSG   --   Grid EM64vr
        baycock@HiWAAY.net
             w4bsg@arrl.net

List Sponsor:  ChampionRadio.com - Trylon self-supporting towers,
safety equipment, rigging gear, LOOS tension guages & more!
http://www.championradio.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>