Towertalk
[Top] [All Lists]

[TowerTalk] Quad Question(s)

To: <towertalk@contesting.com>
Subject: [TowerTalk] Quad Question(s)
From: rakefet@rakefet.com (Vic Rosenthal)
Date: Wed, 02 May 2001 07:46:06 -0700
Tom Rauch wrote:
> 
> I don't know what kind of welding wire he uses, but hopefully it is
> not the steel wire! Normal welding wire for welding ferrous metals
> will rust and start to disappear in a very short time when used
> outdoors.
> 
> If it is for aluminum welding, it probably would be too soft. It would
> break easily, and you'd have a tough time making reliable
> connections. I avoid aluminum electric fence wire for that reason.

It is aluminum, and quite strong.  It does not stretch noticeably (like
soft-drawn copper).  The original poster exaggerated the difficulty of
installation; you just have to avoid kinking it, as you do with any kind of
wire.  It isn't necessary to stretch it before installation; you just tension it
by adjusting the location of the clamps on the spreaders.

I've had a Lightning Bolt quad up for several years now with no problems. 
During the first installation attempt, it fell into a tree.  The wire did not
break (although I had to cut some of it to get it out of the tree).

73,
Vic, K2VCO
Fresno CA

List Sponsor:  ChampionRadio.com - Trylon self-supporting towers,
safety equipment, rigging gear, LOOS tension guages & more!
http://www.championradio.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>