Yep, should work fine. I use a RS 100 watt inverter to power the TV rotor
in my Rover setup. I don't remember off-hand, but I think the rotor calls
for something like 15 watts... Some of these buggers can be real RF noise
generators, though. Mine seems fairly clean, but I usually turn it off as
soon as the antennas reach position.
73
Dan
Dan Evans N9RLA
444 Lynhurst St.
Scottsburg, IN 47170
{EM78}
1/2 of the N9RLA /R no budget Rover Team
Check out the Rover Resource Page at:
http://www.qsl.net/n9rla
----- Original Message -----
>
> So, if you were looking for emergency power options for your station, you
> may find that a small inverter is all you need for the rotor.
>
> good luck,
>
> --...MARK_N1LO...--
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
List Sponsor: Champion Radio Products - We'll be at the Dayton Hamvention
with all of our safety equipment and other products. Stop by booth #559 and
say hi.
<A HREF="http://www.championradio.com";>www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|