When the bar is pressed for COUNTER-CLOCKWISE rotation,my Yaesu G1000-SDX
rotor takes off quickly in the clockwise direction for about 40 degrees
before it begins its COUNTER-CLOCKWISE movement.
When the bar is released from COUNTER-CLOCKWISE rotation, the rotor takes
off for 15 more COUNTER-CLOCKWISE degrees before it stops.
Does anyone know how to fix this problem?
When the bar is pressed or released for clockwise rotation, operation is
normal.
Thanks
Tom K4RV
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|