Towertalk
[Top] [All Lists]

[TowerTalk] Ginpole for 20 foot sections

To: <towertalk@contesting.com>
Subject: [TowerTalk] Ginpole for 20 foot sections
From: paulfinch@msn.com (Paul Finch)
Date: Wed, 13 Jun 2001 13:24:18 -0500
Hello,

So the weight exhibited to the Gin pole at the top pulley mount point is the
down force of the load line plus down force it takes to hold the load static
at the workers end of the load line?  No matter how many times the
advantage.  Right?

Paul Finch
WB5IDM




-----Original Message-----
From: owner-towertalk@contesting.com
[mailto:owner-towertalk@contesting.com]On Behalf Of n4kg@juno.com
Sent: Wednesday, June 13, 2001 1:46 PM
To: TOWERTALK@contesting.com
Subject: Re: [TowerTalk] Ginpole for 20 foot sections


More N4KG observations and comments inserted below.

On Wed, 13 Jun 2001 12:18:30 -0400 "Guy Olinger, K2AV"
<k2av@contesting.com> writes:
> The reduction mechanism of a ganged pulley system is in the number of
> feet of rope the worker pulls in as a ratio to the distance the load
> travels. In a two to one system the worker pulls 200 feet of rope to
> lift the object 100 feet, thus the analog to a lever, and the
> advantage.

        The distance traveled is a RESULT of the mechanical
        advantage, NOT the CAUSE, but can be used to calculate
        the mechanical advantage.   N4KG

> Two to one: rope tied at top block, through pulley at bottom block,
> through pulley at top block, to worker.
>
> Three to one: rope tied at bottom block, through pulley at top
> block, through pulley at bottom block, through pulley at top block,
> to worker.
>
> Four to one: rope tied at top block, through pulley at bottom block,
> through pulley at top block, through pulley at bottom block, through
> pulley at top block, to worker.
>
> 73

        Note the presense of MULTIPLE pulleys at the top
        of the block and tackle.  A  GIN pole has only ONE
        pulley at the top.  The only way to get a mechanical
        advantage is to use a SEPARATE block and tackle
        with a SECOND ROPE.  As I said before, this helps
        the puller but does nothing to reduce the load on the
        GIN Pole.   de  Tom  N4KG

>
> >
> > From: Mike Gilmer - N2MG <n2mg@contesting.com>
To: <towertalk@contesting.com>
> > Date: 2001/06/13 Wed AM 09:06:35 EDT
> > To: towertalk@contesting.com
> > Subject: Re: [TowerTalk] Ginpole for 20 foot sections
> >
> > Nothing "magical" about it...
> >


________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A 
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>