Use A Drill And a bit the same size or next one larger always works just
don't push to hard your after the top of the rivet to drill it off.
N9IWW
Kevin Adam
1239 W. Till Rd.
Fort Wayne IN. 46825
219-490-7312
http://www.fortwayneradioclub.net/n9iww
n9iww@mail.com
-----Original Message-----
From: owner-towertalk@contesting.com
[mailto:owner-towertalk@contesting.com] On Behalf Of Barry Kutner
Sent: Saturday, July 07, 2001 11:28 AM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] Removing rivets?
BTW, these are not solid rivets. They have a hole in the center.
Barry
On 7 Jul 01, Barry Kutner wrote:
> Looking for advice on how to remove rivets. New territory for me...
> Tnx,
> Barry
--
Barry Kutner, W2UP Internet: w2up@mindspring.com
Newtown, PA FRC alternate: barry@w2up.wells.com
List Sponsor: Are you thinking about installing a tower this summer?
Call us
for information on our fabulous Trylon Titan self-supporting towers - up
to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|