Clive:
I am using .01 uF discs across the brushes and .1 uF large AC rated bypass (to
the tower
ground) capacitors on each of the motor leads within 6 inches of the motor.
I have no hash as a result on any band.
73,
Tim K3LR
http://www.k3lr.com
Clive GM3POI wrote:
> Does any one know the best Value components for curing PP hash from the six
> brushes?. And are any of you using power diodes across the DC inputs?.
> Regards Clive GM3POI
>
> List Sponsor: Are you thinking about installing a tower this summer? Call us
> for information on our fabulous Trylon Titan self-supporting towers - up to
> 96-feet for less than $2000! at 888-833-3104 <A
> HREF="http://www.ChampionRadio.com";>
> www.ChampionRadio.com</A>
>
> -----
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|