Towertalk
[Top] [All Lists]

[TowerTalk] Re:Stepper Gearing source

To: <towertalk@contesting.com>
Subject: [TowerTalk] Re:Stepper Gearing source
From: K7GCO@aol.com (K7GCO@aol.com)
Date: Mon, 27 Aug 2001 15:47:34 EDT
In a message dated 8/27/01 10:47:13 AM Pacific Daylight Time, 
meamonte@hotmail.com writes:

<< 
 If you need gearing for the capacitor drive, try using the reduction gear 
 assembly found in dot matrix printers platen drives, which are thrown away, 
 or can be had for almost free..
 
 73, DX, de Pat AA6EG/N6IJ  meamonte@hotmail.com
 On the web: http://www.polkinghorn.org/n6ij, or   
 http://communities.msn.com/n6ij
 599 DX Drive Marina CA 93933
  >>
110 VAC selsyns work great for rotatry inductors and variable capacitors.  
Only a 180 degree calibrated dial is needed for variable capacitors and a 
counter dial for rotary inductors.  It has a "variable speed" feature also.  
k7gco

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 96 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>