Towertalk
[Top] [All Lists]

[TowerTalk] u bolts

To: <towertalk@contesting.com>
Subject: [TowerTalk] u bolts
From: n4kg@juno.com (n4kg@juno.com)
Date: Tue, 25 Sep 2001 21:40:55 -0600
Any Fastener Supply outlet (see your Yellow Pages)
or good hardware store should be able to supply them.
I found a supplier who was able to ship in galvanized
U-bolts in one day at reasonable cost.  All you need
are the dimensions (opening width, length, and diameter).

Tom  N4KG


On Tue, 25 Sep 2001 22:42:37 -0500 Richard Brown <rjbro@bellsouth.net>
writes:
> 
> What is a source for the U bolts that mount the rotor  mounting 
> plate on
> rohn 25 tower?
> Thanks for the  info .
> Dick W5AA
> 
> 
> List Sponsored by AN Wireless:  AN Wireless handles Rohn tower 
> systems,
> Trylon Titan towers, coax, hardline and more. Also check out our 
> self
> supporting towers up to 100 feet for under $1500!!  
> http://www.anwireless.com
> 
> -----
> FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
> 

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>