Towertalk
[Top] [All Lists]

[TowerTalk] Source for stainless steel U-bolts?

To: <towertalk@contesting.com>
Subject: [TowerTalk] Source for stainless steel U-bolts?
From: n8de@thepoint.net (Don Havlicek)
Date: Fri, 19 Oct 2001 17:15:24 -0400
Mike,
You might try:

http://www.instockss.com/index.shtml

though I prefer to use regular steel U-bolts as they have less tendency
to freeze up under load.   Just put plenty of non-corrosive silicone
seal on them BEFORE and AFTER you install them.  I've had regular bolts
up 20 years .. peeled off the silicone seal .. and bright bolts
underneath.  
Don
N8DE

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>