Towertalk
[Top] [All Lists]

[TowerTalk] Wilson Tubular and Base Question

To: <towertalk@contesting.com>
Subject: [TowerTalk] Wilson Tubular and Base Question
From: anonbyte@home.com (Doug Ford)
Date: Wed, 9 Jan 2002 21:13:17 -0500
Hi all........

I have recently picked up a 40' Wilson crank-up tubular tower from a
friend but it doesn't have a base for it.  I understand that the US
Tower MA40 bases work just fine with the Wilson.  I'd like to use the
MAB40 standard base along with the MAF-40 fold-over add-on.  

I guess my concern is whether or not the 3x3x5 foot hole would be okay
using this configuration.  I mean, what kind of weight or strain would
be put on the concrete when leaning the tower over at its minimum height
of 20.5 feet.....along with the MA5B minibeam antenna on top?  In other
words, do I need to expand the hole a little so the leaning tower
doesn't pluck itself out of the ground?

Many thanks,
Doug - KG0MX


________________________________________________________________________
This list is sponsored by the new eHam.net Store.  When you buy products
like ICE filters, Array Solutions StackMatch, or M-Squared Antennas from
the eHam Store for the same price you pay direct, a portion of the sale
price goes to support this list.  Check it out at http://www.eham.net.

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Wilson Tubular and Base Question, Doug Ford <=