Towertalk
[Top] [All Lists]

[TowerTalk] Shunt Feed Capacitor for Tower

To: <towertalk@contesting.com>
Subject: [TowerTalk] Shunt Feed Capacitor for Tower
From: howk2@hotmail.com (Howard Klein)
Date: Thu, 07 Feb 2002 16:52:06
SNIP K2HK
What effect does grounding the elements have on the performance of
>the beam?

SNIP N4KG
>MOST = All Cushcraft and HyGain tribanders and monobanders
>except for the Log Cell DE's in the X7, X9, TH11,  all Mosley
>beams except for the insulated DE's and LP antennas.

But of course I was thinking of the exceptions. I use an X-9 on a 70 ft 
tower which I shunt feed. I rarely have arcing problems unless  something 
goes out of whack. This occasionally happens when we get some winds that 
blows my shunt wire around or  gets my feed lines swinging in the breeze. 
Fortunately my Acom shunts down quickly and does send the arc fault msg. I 
use a Gamma match but find I need better than a 5K vacuum var. I measure the 
capacitive value in the order of 300pfs.


Howard M. Klein, K2HK
ARRL Life Member
DXCC Honor Roll
362 Confirmed Countries
A1 Operators' Club

_________________________________________________________________
MSN Photos is the easiest way to share and print your photos: 
http://photos.msn.com/support/worldwide.aspx


________________________________________________________________________
Where do you get ICE bandpass filters & beverage matching boxes?  The
same place that pays for the hosting of this list:  The eHam Store.
Order online at http://store.eham.net.
-----------------------------------------------------------------------

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>