Jim K4SQR........ Tnx for the info on the mutual coupling taking place. I
added wire and lowered the freq of each (measured at the end of the
transformer lines) to 6.085 and flat SWR. When the 2 transmission lines are
connected to a Tee the resonant freq rises to the target freq but so does the
SWR to 1:7. When the 50 ohm phasing line is added the resonant freq drops to
6.900 and the SWr rises to 3:1. Would trimming the phasing line in the field
raise the target freq and lower the SWR ?? Mny Tnx Mark K8FU
--- StripMime Report -- processed MIME parts ---
multipart/alternative
text/plain (text body -- kept)
text/html
---
|