Towertalk
[Top] [All Lists]

[Towertalk] Tutorial for Tower Raising/Guying?

To: <towertalk@contesting.com>
Subject: [Towertalk] Tutorial for Tower Raising/Guying?
From: dhearn@ix.netcom.com (dan hearn)
Date: Tue, 04 Jun 2002 17:49:39 -0700
There is an extensive collection of tower installation information at
http://www.qsl.net/n1lo/tower.htm compiled by N1LO. 73, Dan, N5AR

Jerry Kincade wrote:
> 
> Unfortunately not, the guy who is writing it is still working on it, I
> think...  that would be K7LXC.  :-)
> 73, Jerry W5KP
> 
> ----- Original Message -----
> From: "Eric Rosenberg" <wd3q@erols.com>
> To: <towertalk@contesting.com>; <pvrc@mailman.qth.net>
> Sent: Monday, June 03, 2002 8:42 PM
> Subject: [Towertalk] Tutorial for Tower Raising/Guying?
> 
> > The roof tower I'm hoping to put up this summer will require
> > guying.  While I've put up roof towers in the past, I've never had to
> > deal with guying, its installation and other related issues.
> >
> > I've gotten information from Phillystran on their product, but am
> > wondering if there's a book, article or series of articles, or
> > tutorials available that take one through the guying process... how and
> > where to place them, installation tensioning, etc.
> >
> > Any advice is appreciated!
> >
> > Thanks and 73,
> >
> > Eric W3DQ
> > Washington, DC
> >
> > _______________________________________________
> > Towertalk mailing list
> > Towertalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
> 
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>