No Tom ...Sorry,
but I am glad its Your problem & not mine... Hi Hi....
Lee VK2LEE
----- Original Message -----
From: "Tom" <[email protected]>
To: <[email protected]>
Sent: Sunday, November 10, 2002 10:29 AM
Subject: [Towertalk] Pro-Search Digital Readout and T2X
> I recently decided to rebuild my rotator with has the Pro-search digital
> interface. It had not been used in about 10 years. I replaced all the
> ball bearings as well as installing a Rotordoc quick connect fitting on
> the unit. I believe I got the 8 lugs wired back up correctly. The
> color codes that came with the Rotordoc connector instructions did not
> match the colors of my rotator and I failed to notice this before I had
> disconnected the wires from the terminal. The rotator rotates fine but
> there is no indication of movement on the digital readout. When the
> unit is first turned on it shows 000 but after the break is released it
> shows 666 and does not changed while the rotator is turning.
>
> Any ideas?
>
>
> --
> 73,
> Tom <[email protected]>
>
>
> _______________________________________________
> AN Wireless Self Supporting Towers at discounted prices,
> See http://www.mscomputer.com
>
> Wireless Weather Stations now $349.95. Call Toll Free,
> 888-333-9041 for additional information.
> _______________________________________________
> Towertalk mailing list
> [email protected]
> http://lists.contesting.com/mailman/listinfo/towertalk
|