Towertalk
[Top] [All Lists]

[Towertalk] Tower Base

To: <towertalk@contesting.com>
Subject: [Towertalk] Tower Base
From: tombaugh@discoverynet.com (tombaugh)
Date: Mon, 25 Nov 2002 10:46:59 -0600
Bruce et al

There is always a limit to the depth of a hole with respect to the width.
Unless you plan on drilling a cylinder, or using a large machine with a tall
reach and small bucket, you can expect similar results. Just because they
specify those numbers, doesn't mean they're realistically achieved.

Tom Baugh
AE9B

> The size of your concrete base may depend more on the skill, or lack of,
> of your backhoe operator than on what size base you wish to have.  At my
> very remote QTH, the one and only backhoe operator for 25 miles was told
> to dig a hole 3' X 3' X 8'.  Due to the size of the bucket, and an over
> zealous operator, the hole turned out to be 4' X 5' X 8'.  You can't
> talk precision when dealing with large earth moving equipment!  Keep a
> tight leash on the backhoe operator.
> Bruce AA5BH


<Prev in Thread] Current Thread [Next in Thread>