Towertalk
[Top] [All Lists]

[Towertalk] Roto stripper

To: <towertalk@contesting.com>
Subject: [Towertalk] Roto stripper
From: w5mc@sbcglobal.net (Mac Mail)
Date: Wed, 18 Dec 2002 23:21:56 -0600
Roto stripper [ company name ]  makes a handheld tool that looks simular =
to a handheld engraving tool.. it has three offset fingers that are bent =
at 90 degrees and in the off position these fingers are open and you can =
just sorta stretch out you wire to be stripped and turn up the tool =
speed as it is varible.. and the centrifugal force close's these blades =
and the stripping begins and ends in a flash  .. and pooof  you got good =
clean wiree to work with..  this works on most all round wire from about =
#30 up thru the bigger sizes.. there are three tool sizes to end up =
working with wire into the " ought ranges "   on the bigger rectangle =
wire we used a torch and sandpaper .. then silver solder..   but isnt =
this #28 a little light duty for antenna work..  good luck  mac/mc


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
---

<Prev in Thread] Current Thread [Next in Thread>