Towertalk
[Top] [All Lists]

[TowerTalk] REF: Telrex Yagis

To: <towertalk@contesting.com>
Subject: [TowerTalk] REF: Telrex Yagis
From: thompson@mindspring.com (David L. Thompson)
Date: Sun Feb 9 21:50:15 2003
N4RJ originally had the 3 el 40 on a 29 foot boom.  He finally went to the 3
el on 46 foot boom.
73 Dave K4JRB

> Just quickly from memory:   Please make an offer!!!
>
> 40M 3 el 46ft boom
> 40M 3 el 33ft boom (?)
> 6 element 20M 46ft boom (X3)
> 5 element 20M 46ft boom (X2) (perfect for 3 el on 40 repairs or custom
> builds as   holes through boom in the same locations as the el 40)
> 3 element 20M
> 6 and 8 element 15M maybe others (I would have to check my receipts)
> 8 and 10element 10M maybe others
> various 2M and 3/4M stuff
> some Telrex rotator parts left
>
> Pick up is best and ideal.    I do have a few wooden crates for motor
> freight but this is difficult.    It can be done however.    More effort
> required!
>
> I collected this stuff for a long time.    I planned a large project
> with them at one point.     I have lived out here in the country 10
> years now and never got to it so it is probably over for my Telrex
> project.     Just too busy with things at work primarily.
>
> I tried to post the original message to the reflector but I guess that
> it did not go through.
>
>
> Thanks........................................Joe / W8SS
> AKA: Dr. Joe Mesh, D.M.D., C.A.G.S. (Prosthodontics)
> from beautiful downtown HELL, Michigan
> Always available at:   info@drsmesh.com
> ........................................................................
> ................
> See us on the Web at:    drsmesh.com
>
>
> -----Original Message-----
> From: k4log [mailto:K4LOG@comcast.net]
> Sent: Sunday, February 09, 2003 2:18 PM
> To: jm@drsmesh.com
> Subject: Re: [TowerTalk] REF: Telrex Yagis
>
>
> Joe,
>
>                   Are any of these shippable or just for pick up only?
> What do you need to get out of um. I'm trying to put together a decent
> setup here in FL, but without buying them new (which I just can't
> afford) everything used in this state is so far shot, that I might has
> well build my own for cost of replacing everything on them.
>
> Tnx Fer your time
>    Rich K4LOG
> ----- Original Message -----
> From: "Dr. Joe Mesh" <jm@drsmesh.com>
> To: <N4OX@webtv.net>; <towertalk@contesting.com>
> Sent: Sunday, February 09, 2003 1:09 PM
> Subject: RE: [TowerTalk] REF: Telrex Yagis
>
>
> > If anyone has interest purchasing Telrex monoband yagis...   I have  a
> > barn full of them.     40m through 10m.    Several for each band.
> >
> > I had always planned a large project of phased Telrex antennas that I
> > have now abandoned.      I had hopes of selling all of my stock to
> > someone of similar interest.      Many have made promises but no one
> has
> > produced a payment.
> >
> > At this time I am happy to sell individual antennas.
> >
> > Thanks........................................Joe / W8SS
> > AKA: Dr. Joe Mesh, D.M.D., C.A.G.S. (Prosthodontics)
> > from beautiful downtown HELL, Michigan
> > Always available at:   info@drsmesh.com
> > ......................................................................
> > ..
> > ................
> > See us on the Web at:    drsmesh.com
> >
> > _______________________________________________
> >
> > See: http://www.mscomputer.com  for "Self Supporting Towers",
> > "Wireless
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with
> any questions and ask for Sherman, W2FLA.
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>


<Prev in Thread] Current Thread [Next in Thread>