----- Original Message -----
From: "j.a.hermans" <j.a.hermans@skynet.be>
To: "Paul Christensen, Esq." <w9ac@arrl.net>; <K7LXC@aol.com>;
<CGooden@insightbb.com>; <towertalk@contesting.com>
Sent: Sunday, April 13, 2003 10:07 PM
Subject: Re: [TowerTalk] Painting fiberglass antennas
> Fiberglass will wear away in a dusty area.
> A good epoxy paint is a good protection. Prefer a white paint, just a
> question to avoid heat absorbtion from sun light.
>
> Jos on4kj
>
>
> ----- Original Message -----
> From: "Paul Christensen, Esq." <w9ac@arrl.net>
> To: <K7LXC@aol.com>; <CGooden@insightbb.com>; <towertalk@contesting.com>
> Sent: Sunday, April 13, 2003 7:13 PM
> Subject: Re: [TowerTalk] Painting fiberglass antennas
>
>
> > > > I purchase a used Diamond 2 m / 70 cm base station antenna. I
> > > > notices some of the paint was coming off with in one foot of the
tip
> > > > of the antenna.
> >
> > I have a Diamond X-50 2M/70 cm base antenna that I needed to hide
against
> > the back pine trees. I used Rustoleum Charcoal Grill spray paint. It
> puts
> > a flat-black finish on the antenna and all mounting hardware that makes
it
> > look absolutely great.
> >
> > The Rustoleum paint completely dries in just about a minute in warm
> weather.
> > I painted mine with two coats and had it back up in less than ten
minutes.
> > It worked so well, that I did the same to my Force12 Sigma 40 in the
back
> > yard two years ago and I haven't had to touch-up either antenna. If
> you're
> > OK with a black antenna, I highly recommend this paint.
> >
> > -Paul, W9AC
> >
> > _______________________________________________
> >
> > See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
> Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
any
> questions and ask for Sherman, W2FLA.
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
>
|