Towertalk
[Top] [All Lists]

[TowerTalk] Screwdirver antennas

To: <TowerTalk@contesting.com>
Subject: [TowerTalk] Screwdirver antennas
From: "MEL WOODY" <N7LYY@EFFECTNET.COM>
Date: Fri, 30 May 2003 04:46:10 -0700
List-post: <mailto:towertalk@contesting.com>
From: <DRIVERTRR@aol.com>
To: <n7lyy@effectnet.com>
Subject: antenna
Date: Friday, December 27, 2002 9:26 PM

Dear Mel,
               My name is Teddy[AE4PM] I purchased an antenna from you well 
over 2 years ago.I have used the antenna on my tractor-trailor since day 
one.I have had it on 2 different trucks now.According to my  records it has 
over 250,000 miles on it.The majority of the time I have ran around 400-500 
watts thru it.I have been well pleased and would recommend your antenna to 
anyone.I plan on purchasing another one soon for a back-up. I have 
experimented with many antennas  and not have had any  that would hold up to 
the punishing elements of  trucking hf.Thanks Mel for a well built 
antenna.Yours has been tried and proven.                                      
                                                                   
                                                                              
                    Teddy Rose  AE4PM
From: "Dave Frechette" <k7qt@pacbell.net>
To: "MEL" <N7LYY@EFFECTNET.COM>
Subject: New Antenna
Date: Wednesday, November 13, 2002 2:59 PM

Just to let you know that I installed the new screwdriver antenna and connected
everything up and that it works better than I had ever expected! It outperforms
everything I have used in the past other than frequency specific antennas.
This unit stays on the setting and does not crank down on itself, regardless
of speed or road condition, and tunes virtually flat from 160 to 10 meters.
Sure beats the hell out of my old HS100 and SG 230/303 setups!
 Keep up the good work!

Dave, K7QT 
From: "Dr. Harold Wingo" <hwingo@cybersurf.de>
To: "MEL WOODY" <N7LYY@EFFECTNET.COM>
Subject: Antenna
Date: Monday, October 21, 2002 3:35 PM

Mel . . .
I received my antenna Saturday!!!!!  I LOVE IT!!!!!!!!!!!!!!!!!!!!!!!
Installation was easy and painless!!!!!!! Worked the first time without
pulling my hair out!!!!!!!!!!!!!!!!  Straight out of the gate it's been
a real delight and a pleasure doing business with you!!!!!!!!!!!!!!! I
hope the antenna continues to provide me with good service.
Thanks for your workmanship!

Dr. Harold Wingo
KD5DNA
 From: "MEL WOODY" <N7LYY@EFFECTNET.COM>
To: "Mel Woody" <n7lyy@effectnet.com>
Subject:  antenna
Date: Wednesday, November 13, 2002 9:04 PM


From: ken grossman 
To: MEL WOODY 
Sent: Wednesday, November 13, 2002 8:59 PM
Subject: antenna


good evening Mel..
 i got antenna mounted and hooked up today and i must say i was totally suprise
... It worked as you advertised on all bands.. It was unbelievable.. I used the
 Mfj analyser and the proof was in the observing.... I was especially suprised
 when i went to 160 meteres..... the antenna brought it in with out any
 problems at all.. Mel you have one fine atenna..... Im especially empressed by
 the aluminum mount you used....you defineately have one happy customer here ..
.... I would recommend this antenna highly over any other mobile anttenna i
 have tried.... 
once again thanks for making a great super antenna. Im triping tomorrow so i
 plan on giving it a good try... 
                                               
 sincerely
 Ken Grossman KG0SQD


From: "MEL WOODY" <N7LYY@EFFECTNET.COM>
Subject:  Screwdriver antenna
Date: Monday, April 14, 2003 8:44 PM


From: "Bryan Kazem" <BryanK@Electroimpact.com>
To: <n7lyy@effectnet.com>
Sent: Monday, April 14, 2003 4:25 PM
Subject: Screwdriver antenna's


Mel,

My name is Bryan Kazem (WØMCD) I purchased one of your dk3 screwdriver 
antenna's about 4-5 months ago and have been very happy since. This is one of 
the best products I have purchased. It works great on all bands.

Bryan Kazem

Cel # 425-330-3576
home:360-658-5056

http://www.qth.com/n7lyy
73'S
MEL
N7LYY


<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Screwdirver antennas, MEL WOODY <=