Towertalk
[Top] [All Lists]

[TowerTalk] Sunlight protection for fiberglass

To: <towertalk@contesting.com>
Subject: [TowerTalk] Sunlight protection for fiberglass
From: kb9yku@comcast.net (kb9yku)
Date: Mon Aug 18 12:03:18 2003
how abote heat shrink  the kind with hot melt glue inside used for coax
water proofing if youcan buy tham  in long parts of the right size
ken
kb9yku

----- Original Message ----- 
From: "Mike Gilmer - N2MG" <n2mg@contesting.com>
To: <towertalk@contesting.com>
Sent: Monday, August 18, 2003 10:08 AM
Subject: [TowerTalk] Sunlight protection for fiberglass


> I have a used M2 40M3L antenna that I am putting back
> together and I noticed that the fiberglass insulating
> parts are starting to "fray" - i.e., the glass fibers
> are separating somewhat, giving the surface a "fuzzy"
> feel.  I suspect UV is the cause.
>
> I would like to protect the fiberglass from further
> damage.  I considered using 3M #88 electrical tape as
> a "wrap", but is there something more suitable for
> this?
>
> Mike N2MG
>
> ________________________________________________
> PeoplePC:  It's for people. And it's just smart.
> http://www.peoplepc.com
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>


<Prev in Thread] Current Thread [Next in Thread>