> Being a REAL cheap sob
This post got my attention. I have 15 ground rods to do. N5OT is
definitely living on borrowed time at this point.
>I placed my copper strip into the kerf and then drilled to holes through
the
>rod, copper, and other side of the rod and used brass screws, washers and
>nuts.
> After the first couple, I made myself a jig...[snip]
Any sense of the pros/cons of this approach from the ground gurus? if it's
a copper clad ground rod, then isn't the bulk of the contact area NOT
copperskin-to-copperskin? Would this be a problem (my guess-yes-but I'm
only an amateur).
JERRY, how do you weatherize this after you've done it?
Mark, N5OT
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|