Re: [TowerTalk] Ground through wall

[Terry Dunlap <kk6t@pacbell.net>]

McMaster-Carr shows brass all thread:

http://www.mcmaster.com/param/asp/psearch.asp?FAM=threadrod&FT_101=138&session=desc=Threaded%20Rod;threadrod;101=138

73 de Terry KK6T



At 12:39 PM 11/11/2003 -0600, Gene Bigham wrote:
> I went the Radio Works route of station ground, and have a heavy cable to 
> the wall behind my tuner with a large copper lug on it to a stainless bolt 
> running through the plate to the outside, where in similar fashion there 
> is another lug on a heavy cable to a ground rod located just outside.  My 
> question is, I would like to replace the stainless bolt/washer/lock washer 
> arrangement with something brass or copper but cannot find at Home Depot 
> or hardware here.  Is there such a thing, this is a quarter inch or so 
> sized bolt that is 5 1/2 inches to 6 inches long.
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with 
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk