Towertalk
[Top] [All Lists]

Re: [TowerTalk] SteppIR Beams

To: ragnar otterstad <la5he@yahoo.no>
Subject: Re: [TowerTalk] SteppIR Beams
From: Rick Tavan <tavan@tibco.com>
Date: Fri, 19 Dec 2003 22:05:10 -0800
List-post: <mailto:towertalk@contesting.com>
Very unscientific observation: I put up a 3 element SteppIR in September, 2002 on a northwest-facing ridge at about 2000m in the Sierra Nevada mountains of northern California. It is on a 23m tower that I crank down to 7m in bad weather. Winter storms include "a lot" of wind, snow and ice but I have no exact measurements. The antenna looks and performs today just like new. Several times last winter I noticed high SWR on cold, wet mornings that corrected itself after some undetermined combination of RF power and sunlight. The elements sag noticeably under snow load but spring right back when the snow shakes or melts off. I leave the controller powered up all the time for superstitious reasons. Nonetheless, several times it has lost calibration. It only takes a few keystrokes and then a few minutes to run the recalibrate function. The deep pattern and near-instant 180 degree reverse feature are worth the entire price and effort of the antenna. I particularly enjoy picking off Caribbean mults on 20 with the reversed SteppIR while running JAs on 40 with a Mag 240N on the same mast. I am very happy with the antenna and may turn it into a 4 element.

73,

/Rick N6XI

ragnar otterstad wrote:

I am thinking about buying one of the SetppIR beams.
My concern is the long term reliability under winter
conditions.

Has somebody been using one of any length of time
under heavy winds, ice, snow etc ?



_______________________________________________


See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>