Re: [TowerTalk] stepping motors

[tongaloa <tongaloa@alltel.net>]

Old 5.25" full height drives still show up at hamfests and have
a nice stepper for head positioning. If you can find trashed 8"
drives, they have even bigger motors.

You might also look at old dot matrix printers. Some use servos, some 
steppers.
-bob

Jim White, K4OJ wrote:

> I just happened to see this and remembered there was someone on TT who 
> was looking for steeping motors for tuning a remote tuner (I think) - 
> fwiw
>
> Just saw eBay auction:  Item number: 2588451642    
>
> I am in no way connected, and do not know the seller, just remembered 
> somebody looking for a remote tuning motor...
>
> K4OJ
>
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", 
> "Wireless Weather Stations", and lot's more.  Call Toll Free, 
> 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk



_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk