Towertalk
[Top] [All Lists]

Re: [TowerTalk] Question on concrete pour for self-supportingtower...

To: "Brian Lambert" <n1ik@n1ik.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Question on concrete pour for self-supportingtower...
From: "FireBrick" <w9ol@billnjudy.com>
Reply-to: FireBrick <w9ol@billnjudy.com>
Date: Thu, 18 Mar 2004 04:44:32 -0600
List-post: <mailto:towertalk@contesting.com>
I'm a retired Chicago Licensed Mason Contractor.
It MUST be a unified pour.

Believe it or not, it's very hard to get concrete to stick to previously poured 
concrete.
Except of course, where you don't want it to. :-)


----- Original Message ----- 
From: "Brian Lambert" <n1ik@n1ik.com>
To: <towertalk@contesting.com>
Sent: Wednesday, March 17, 2004 9:30 PM
Subject: [TowerTalk] Question on concrete pour for self-supporting tower...


> Hi,
>
> Could anyone tell me whether one must pour all the concrete for a
> self-supporting tower base in one pour, or is it OK to mix up bags of
> concrete over n weekends, and pour them into the form as you go?
>
> Reason I ask is that it might be hard to get a concrete truck to where I
> need it to go, so I'm thinking about alternatives.
>
> 73 de N1IK, Brian
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
> Weather
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for
Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>