Towertalk
[Top] [All Lists]

[TowerTalk] Lubrication

To: towertalk@contesting.com
Subject: [TowerTalk] Lubrication
From: Erik Jakobsen <eja@urbakken.dk>
Date: Mon, 12 Apr 2004 08:05:54 +0200
List-post: <mailto:towertalk@contesting.com>
Hi.

I have a beam, where the boom to mast has some "U" bolts, that are stainless, and are going thru the aluminum.

What's the best to lubricate these stainless "U" bolts with, so that there will be no corosion on the aluminum. I have some coppergrease, but don't think its good to use.

Any solutions are most welcome.
--
Med venlig hilsen - Best regards.
Erik Jakobsen - eja@urbakken.dk.
Licensed radioamateur with the callsign OZ4KK.
SuSE Linux 9.0 Proff.
Registered as user #319488 with the Linux Counter, http://counter.li.org.

_______________________________________________

See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>