Ed Laughery wrote:
> So the only way I am deciding which pin is #1
> (missing pin) is thru the schematic where it
> appears that looking at the back of the unit,
> the pin layout would be:
>
> 123
> 456
>
> Is this correct?
Looking at the Molex plug on my G-450A, it would appear that you're correct! Pin
1 of the chassis-mounted female connector is the upper-left and is numbered as
you suggest.
Bill / W5WVO
>
> Any help, confirmation, will be appreciated.
>
> Ed AD5JV
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers",
> "Wireless Weather Stations", and lot's more. Call Toll Free,
> 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|