Re: [TowerTalk] Yaesu rotators

[Pete Smith <n4zr@contesting.com>]

At 12:14 PM 6/30/2004, Alan AB2OS wrote:
> I am sure that a Yaesu G-800 would handle what I want to put up, but I 
> thought that a G-1000 would give a better safety margin. Yet I notice that 
> the eham reviews rate the G-1000 rotators lower than the G-800 models; the 
> G-1000 actually received several 5/5 ratings, but the 0/5 and 1/5 ratings 
> pulled the average way down. Are the bigger ones really so much worse than 
> the smaller ones?
>
> Opinions? Experiences?


I think that's error from a small, self-selected sample.  I have owned both 
G-800 (2 years) and G-1000 (9 years now).  The G-1000 was still going 
strong when struck by lightning last August -- pot is fried, and I haven't 
repaired it yet.  I replaced it with another.  It is turning a C-3S and a 
2-element 40m shortened yagi (18-ft boom).  The control boxes are 
identical, and the rotators almost so - the G-1000 is about 1/2 inch taller.


73, Pete N4ZR
The World HF Contest Station Database
was updated on June 5, 2004
2728 contest stations at
www.pvrc.org/WCSD/WCSDsearch.htm  

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk