> The reason that an unmodified PRO demonstrates distortion
and
> an apparent reduction of close-in IMD is NOT lack of
primary
> selectivity. The roofing filter bandwidth is +/- 7.5KHz
from
> center frequency. All signals within the roofing filter
are
> AM demodulated to create the noise blanker drive signal.
This
> is amplified in a chain which is powered from the 8V rail.
You're talking about a totally different problem. You are
talking about the low pitched PRO rumble and I am talking
about IM3.
IM3 is the mixing of two signals that produces a third
"phantom" signal.
73 Tom
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|