The answer depends on the wind rating of the area where the tower is
located.
An example: In the 70 mph wind speed area, a 50 foot Rohn 25 tower should
be guyed at the 45 and 23 feet levels.
Jim
KB0X
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com]On Behalf Of Joe
Sent: Wednesday, July 14, 2004 5:27 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Rohn 25G Guying Height?
My brother has purchased a 50 foot Rohn 25G tower, and needs
recommendations on guying levels. I gave him a bunch of Phillystran cable
and a Rohn 25G anti-torque arm setup sufficient for guying at the 40 foot
level. Will that suffice? He is mounting a 3 element SteppIR at the
top. It's been too many years since I had a Rohn 25G.....CRS.
Thanks guys,
73,
Joe
WDØM
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|