That is correct. My apology for the misunderstanding. Cadweld is a brand by
Erico, so is OneShots. Erico stands for Electric Rail Improvement Company
and their first product was Cadweld. From there many other products came on
board including OneShots.
Wilson Lui
ATI Tectoniks
_____
From: Phil Camera [mailto:kb9cry@comcast.net]
Sent: Friday, July 16, 2004 6:51 PM
To: Wilson Lui
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] Ground Rod Connections
If I may, Cadwelds are a registered product line made by Erico Corp of which
one of them is the OneShot types. You can determine the type of mold and PN
you need from the erico.com website.
Wilson Lui wrote:
You are correct. Cadweld, Exothermic, or One Shots ARE made for this
purpose. They are the same thing. To clarify, Cadweld is a company, not a
type of welding or product. Exothermic Welding, is a type of welding that
companies like Cadweld provides. One shot is a product that makes Exothermic
Welded connections, and the One Shot is a product by Cadweld. Hopefully this
helps.
Wilson Lui
ATI Tectoniks
wilsonlui@atitec.com
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of hdmc38@bellsouth.net
Sent: Saturday, July 03, 2004 9:52 AM
To: Alan AB2OS; towertalk reflector
Cc: towertalk@conteasting.com
Subject: [TowerTalk] Ground Rod Connections
How about Cad WEld ,Exothermic,or one shots.I believe these are made exactly
for this purpose.
Joe K4XZ
From: Alan AB2OS <mailto:ab2os@att.net> <ab2os@att.net>
Date: 2004/07/03 Sat AM 09:19:19 EDT
To: towertalk reflector <mailto:towertalk@contesting.com>
<towertalk@contesting.com>
CC: "R. Kevin Stover" <mailto:rkstover@mchsi.com> <rkstover@mchsi.com>
Subject: Re: [TowerTalk] What Welder Makes Good Exothermic Bonds?
So how well would brazing with a Bernzomatic or similar Propane or MAPP
torch work for bonding copper ground wires to copper-clad steel ground
rods?
Alan AB2OS
(who did manage to produce some serviceable bronze welds wth an
oxy-acetylene torch a few decades ago but never mastered the art of
fusion welding)
On 07/03/04 08:41 am R. Kevin Stover put fingers to keyboard and
launched the following message into cyberspace:
<snip>
I suppose someone makes some wire to use in a MIG welder to weld copper
but I'd be surprised if there was. Copper and brass are usually brazed
or soldered. Not welded.
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
JOE PATRICK
SENIOR PLUMBING/MECHANICAL
INSPECTOR CITY OF BOYNTON BEACH
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|