Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rohn Torque Bars

To: [email protected]
Subject: Re: [TowerTalk] Rohn Torque Bars
From: [email protected]
Date: Mon, 2 Aug 2004 09:55:56 EDT
List-post: <mailto:[email protected]>
Jack

I was told the same thing.  They ARE unnecessary on the new style because the 
new style is beefed up and more stiff...a slightly different style than the 
old two bolt ones.  I would stick with the torque arms on the old style, since 
you already have them.

The new ones have spacer washers in them to stop any play...the old ones had 
lots of room if the torque bars were not inserted.

Bill K4XS
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
[email protected]
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>