Can anyone help me identify the model of a tower and it's structural
specification from an old factory spec sheet?
Tristao Towers 115 E Fifth Street in ?, CA, (the stick on label is so worn
it can not me read).
3 section crank-up each section approx. 22 feet in length.
Lower section 16.5 inch triangle to the center of the legs.
Lower section legs are 1.25 inch O.D. with 1/8 inch wall thickness
galvanized.
The top 2 sections are 1.0 inch legs.
Flat thrust bearing plate factory welded across the legs at the top of the
top section.
All sections have a 1.5 inch D type light gauge steel wire ring welded to
them at the top of the section.
Tilt over base.
Z braces welded at each junction with small C channel braces welded at the
top of each section.
Any help or copy of a spec sheet is appreciated!
Steven K. Marr
21 Streamside Ct.
St. Charles, MO. 63303
Voice: 636-795-2150
email: stevenmarr@charter.net
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|