Re: [TowerTalk] Calculations

["Alan C. Zack" <k7acz@cox.net>]

My accepted wind calcs reference IBC 2000 Wind load UBC Sec 1618 and 
UBC Tables 16.  I am not sure but my Bldg Inspector seemed to think 
this was the same requirements as shown in UBC-97 but just contained 
in a different section of IBC-2000.  IBC-2000 has a special section 
regarding towers.  I don't know this for sure .

Richard (Rick) Karlquist (N6RK) wrote:

 > A possible reason would be that IBC-2000 might be a stricter spec,
> and the tower is not engineered to meet that spec, at least with
> a usable antenna area on top.  Does anyone know if IBC-2000 is a
> tighter spec, or just a different calculation algorithm?
>
> Rick N6RK

--
__________________________________________________________________________ 

Alan Zack
Amateur Radio Station K7ACZ
Las Vegas, Nevada, USA
Quality Engineer, The Boeing Company, Retired
Aviation Chief Warrant Officer, U.S. Coast Guard, Retired
U.S. Coast Guard, Always Ready, Always There
Every hour, Every day, Around the Clock and Around the World
SEMPER PARATUS
http://gocoastguard.com


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk