Towertalk
[Top] [All Lists]

Re: [TowerTalk] Mounting a 4x4 in concrete

To: "Derek Cohn/WB0TUA" <vibroplex@mindspring.com>,<towertalk@contesting.com>
Subject: Re: [TowerTalk] Mounting a 4x4 in concrete
From: "J.Hector Garcia M" <Hector@telecom1.net>
Date: Wed, 27 Oct 2004 00:36:13 -0700
List-post: <mailto:towertalk@contesting.com>
Derek:

the lumber on the concrete  is necesary ?
 i remember the mail boxes use a similar  4x4 and can be mounted using this
anchor, is very simple, is  like a nail on the  bottom and  a  simple mount
where you can  put your 4x4 , i remember see this in home depot, maybe a
local lumber have some or any other big  store , if you get the idea you
will save some money and time , you can build your own stronger version
exactly at your needs, maybe  a piece of steel with a big angle in the
bottom to get the sufficient  anchorage to this 20 ft   4x4 you will have 4
more ft on the air, i think you will need some guy wires  but just to have a
little more stability.

i hope you get my idea.
good luck
XE2K
----- Original Message ----- 
From: "Derek Cohn/WB0TUA" <vibroplex@mindspring.com>
To: <towertalk@contesting.com>
Sent: Tuesday, October 26, 2004 9:45 PM
Subject: [TowerTalk] Mounting a 4x4 in concrete


> Dear All,
>
> I'm trying to elevate my very low dipole that is fed with balanced line.
I'm trying to go with a non-metallic support so the balanced line does not
interact.  My dipole is currently 18' in the air.
>
> I recently purchased a 22' fiberglass mast from The Mast Co.  This is
their heavy duty windsock pole.  I'm planning on mounting it to a 20'
redwood 4x4 with the Kwik-Block mounting blocks they also sold me.  I plan
to set the 4 x4 in concrete.
>
> I checked around and one of the local deck builders says I need to put
about 4' of the redwood 4x4 into the concrete.  That would reduce my
effective height of the 4x4 to 16'.  If I overlap the fiberglass mast a foot
or two, I have 16' + 20' = 36' which is roughly double the height I have
now.
>
> What do you guys think about the 4' of 4x4 into the ground.  Too much, too
little, just right?  I noticed that you can put l-bolts into the concrete
footer and mount a u-shaped bracket on top of the footer that will accept
the 4x4.  This is advertised for deck applications and I think it wouldn't
support 20 feet of 4x4.  However, it would give me four more feet of height
if it could be made to work.  Has anyone tried this?
>
> 73,
>
> Derek Cohn
> Morse Telegraph Club - Alton Chapter
> Telegraph Office UD, sine DJ
> Amateur Radio Station - WB0TUA
> 1969 M274A5 Mechanical Mule
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>