Towertalk
[Top] [All Lists]

[TowerTalk] Tower ID Help and any suggestions...

To: "Towertalk" <towertalk@contesting.com>
Subject: [TowerTalk] Tower ID Help and any suggestions...
From: "Dave Cole" <dave@nk7z.net>
Reply-to: dave@nk7z.net
Date: Mon, 6 Dec 2004 18:23:54 -0800
List-post: <mailto:towertalk@contesting.com>
Hello,

I have just obtained a 21 foot(collapsed) crank up Mast of the Tri-Ex Sky
Needle type tower.  I have not had it fully extended as of yet, and am
looking for two things if possible...

1.  How can I ID the tower and maker?
        a.  21 feet 6 inches collapsed
        b.  Crankup by hand wench
        c.  Single bolt hole in bottom to allow it to pivot over.
        d.  Base is a flat plate with two stubs coming out of it.  The mast sits
inside that.
        e.  Not alight by any means...
        f.  Old owner said it was around 35 feet tall when fully extended.
        G.  Around 20 or 25 years old
        H.  Galv steel construction
        I. Photos at http://www.nk7z.net/tower (only one so far as it is raining
like mad)

2.  Any suggestions on what steps should be taken to referb it before
erection?

It looks to be in very good shape, and it came with a beam...  Any help
would be appreciated.


Thanks,
Dave
NK7Z

The truest measure of a society is how it treats its elderly, its pets, and
its prisoners


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>