Juan:
I used solid insulated wire, #12AWG (not sure of metric equivalent) to
wrap around my coax and control cables on my Trylon tower, which also has
flat members. The wire can be removed and re-attached only a few times, but
here in US it is very inexpensive.
73 de
Gene Smar AD3F
----- Original Message -----
From: "Juan M. Chazarra EA5RS" <ea5rs@ono.com>
To: <towertalk@contesting.com>
Sent: Wednesday, December 08, 2004 8:04 AM
Subject: [TowerTalk] Taping wires to flat member towers
> Adhesive tape tapes coax just fine to round member towers, but I am
> having a hard time taping coax, rotor cable, etc to the members of my
> tower which are all flat. Any ideas?
>
> Thanks,
> Juan EA5RS
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|