> must not have been very good galvanizing. I have used electrical tape
> for 20 years on rohn towers and the only difference when I remove it is
> that the galvanizing is shinier under the tape.
>
> ::Ditto here. Only problem with taping coax to tower legs is that tower
> legs are a lot harder than coax (other than hardline) and pulling
> overlapping layers of tape can crush many types of coax, rendering them
> more prone to failure than before taping. I use gentle wraps spread over
> 6" of cable or so, rather than pulled-tight wraps all overlapping in the
> same place. Crushed too much coax that way over the years.....-WB2WIK/6
>
>
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|