Hello and HH to all.
I'm putting up 2 Rohn 25G towers attached to or home using Rohn house brackets:
1 Uses the Rohn accessory shelf BAS25G at the top with a 2 el 40m beat just
above the thrust bearing. I am considering modifying the second shelf to accept
an addition thrust bearing (TB4) and installing the rotor 10 ft. or so below
the second thrust bearing.
The other will be toped with a Rohn 25AG2. The rotor will be mounted on a AS25G
a few feet below a TB4 on BPL25G. Antennas are Bottom TA-33 Classic top Hy-Gain
5 elements on 10m. Guying is NOT an option.
Constructive comments, suggestions, entertained
73
Bill kc0qa/4
___________________________________________________________
Sent by ePrompter, the premier email notification software.
Free download at http://www.ePrompter.com.
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|