Towertalk
[Top] [All Lists]

Re: [TowerTalk] Re: Slopers, half slopers, (using the tower)

To: <kd4e@verizon.net>, <TowerTalk@contesting.com>
Subject: Re: [TowerTalk] Re: Slopers, half slopers, (using the tower)
From: "Guy Olinger, K2AV" <olinger@bellsouth.net>
Date: Thu, 30 Dec 2004 02:19:40 -0500
List-post: <mailto:towertalk@contesting.com>
Towers are a problem for antennas that are not balanced with respect to the tower, e.g. have a balanced feedpoint at and perpendicular to the tower, or in the case of a yagi, have the boom attached to or directly over the tower.

If one END of a dipole is insulated but strung from a tower, there can be significant current induced in the tower. This also works to couple noise from coax shields and control cables coming up the tower to the dipole.

The amount of induced current varies significantly. In one model, without changing the dipole height or size, I increased the effective height of the supporting tower only 11 feet and changed the current in the tower from 1/10 of the current in the dipole to 2/3. The feedpoint Z of the dipole went from 78 j0 to 105 -j10.

This is a simple illustration of unwanted effects of a tower that isn't even connected. FEEDING the tower energy instead of inducing it only INCREASES the unpredictability.

Getting your "semi-L" arrangement to work involves all the same unpredictability as the sloper and the dipole example above.

Any antenna pulled unbalanced off a tower is highly unpredictable due to the tower, and needs some luck to hit a workable combination.

73, Guy.

----- Original Message ----- From: "doc" <kd4e@verizon.net>
To: <TowerTalk@contesting.com>
Sent: Wednesday, December 29, 2004 7:07 PM
Subject: Re: [TowerTalk] Re: Slopers, half slopers, (using the tower)



That's why slopers worked against the tower should be called
sloppers instead of slopers.

They are sloppy systems that generally, if they work at all,
work by good fortune rather than proper design.

What about treating the antenna as semi-vertical "L" including the tower in the equation?

In my case one leg can be a 55 foot Rohn 25 tower, at 55 feet
I can directly/electrically attach a horizontal wire out another
80 feet to the feedpoint then another 135 feet to the far end
insulated by a tie rope up in a tree.

100+ feet of the horizontal section will go across a shallow
ravine thereby increasing the effective height at the
feedpoint.

Fed with open wire I am guessing this will be a decent
NVIS doublet/dipole antenna on 160 and 80 and an interesting
antenna for 40-10M.


-- Thanks! & 73, doc kd4e A blessed and joy-filled New Year to all!


_______________________________________________


See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>