Re: [TowerTalk] steppIR as topload

["Richard M. Gillingham" <rmoodyg@bellsouth.net>]

Actually, members of the Steppir reflector have indeed experimented with 
using it as a hat for tuning shunt loaded towers on 160.  I don't have the 
particulars, but I do recall seeing threads on this a couple of years ago. 
Researching their archives should turn up something.

Good luck
Gil, W1RG
3 el Steppir user since Aug 2002.

----- Original Message ----- 
From: "Jim Jarvis" <jimjarvis@comcast.net>
To: <towertalk@contesting.com>
Sent: Wednesday, February 09, 2005 7:27 PM
Subject: [TowerTalk] steppIR as topload


> Would it not make sense to contact SteppIR and ask
> questions about standoff distances of the motor units
> from the boom, under 160m topload applications, rather
> than speculate here?
>
> My guess is, they haven't explored it...but checking
> would be a good first step.
>
> N2EA
> jimjarvis@ieee.org
>
> _______________________________________________
>
> See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless 
> Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with 
> any questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk