Towertalk
[Top] [All Lists]

[TowerTalk] RE : Coaxial Antennas

To: "'Doug Rehman'" <rehman@surveil.com>, <towertalk@contesting.com>
Subject: [TowerTalk] RE : Coaxial Antennas
From: "hermans" <on4kj@skynet.be>
Date: Mon, 16 May 2005 21:13:25 +0100
List-post: <mailto:towertalk@contesting.com>
I dont feel well, on first sight......
How serious can this be ?

Jos    on4kj

-----Message d'origine-----
De?: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] De la part de Doug Rehman
Envoyé?: dimanche 15 mai 2005 21:36
À?: towertalk@contesting.com
Objet?: [TowerTalk] Coaxial Antennas

At present, I have a horizontal loop for 6 meters at about 20'. Six has
had
a lot of openings lately so I thought I'd play with a small yagi. In
searching the web, I ran across an article for building a 2 element yagi
out
of PVC and coax. (http://www.hamuniverse.com/K4mmg2and6meter.html) The
inspiration was N0KHQ's 17 meter coaxial Moxon.
(http://www.hamuniverse.com/17mcoaxmox.html) The purpose for using coax
is
to shorten the antenna elements.

I took the concept and built a three element yagi on a 6' boom. Using
double
shielded RG-58 cable, my driven element was resonant on 50.125 at about
66"-
about 40% shorter than a conventional wire dipole. I used the same
scaling
to cut the reflector and the director.

With the yagi at the same height as the loop and about 25' away, both
antennas give identical S meter readings on a nearby 6 meter beacon.
With a
5 watt source located about 250' away from the antennas, I used an Avcom
spectrum analyzer to measure signal strengths on each and found them to
be
within a dB of each other when the yagi is pointed at the source. The
feedlines are identical coax and pretty close to being the same length.

The front to side on the yagi is about 10 dB and the front to back is
pretty
much nonexistent. (I suspect that my scaling didn't work very well for
the
director and reflector...)

At any rate, it appears that the shortened coaxial elements do work. It
would be an interesting exercise to build a 40 meter Moxon.

Has any one else had experience with these antennas, especially as to
efficiency when compared to full sized elements? Cebik had a page on his
website that discussed N0KHQ's Moxon, but the Google link to it is dead.

Doug
K4DDR

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with
any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>