Towertalk
[Top] [All Lists]

Re: [TowerTalk] Climbing safety

To: towertalk@contesting.com, nv8a@att.net
Subject: Re: [TowerTalk] Climbing safety
From: K7LXC@aol.com
Date: Thu, 30 Jun 2005 23:27:36 EDT
List-post: <mailto:towertalk@contesting.com>
In a message dated 6/30/2005 7:49:42 PM Pacific Daylight Time, 
towertalk-request@contesting.com writes:

>  Can the Y-configuration fall-arrest lanyard serve as a positioning 
lanyard with the small hook attached to the chest D-ring of the harness 

Hi, Alan --

    No. Your fall-arrest lanyard is for fall-arrest attachment above you. You 
need a positioning lanyard to hold you in working position.

>  and each of the rebar-hooks attached to a tower leg, 

    I'm not sure what you mean by this. Are these steps?

>  or do I need a "non-stretchy" lanyard for that? 

    The shock absorbing fall arrest lanyard doesn't stretch; typically they 
have sewn cross bars that pull apart at about 50 pounds pressure. They slow you 
down. 

>  Or does the Lad-Saf/safety line 
combination itself serve as a fall-arrest system rather than a 
positioning device? 

    Well, it's a fall-arrest system but if you're working at the ladder and 
cable - go ahead and use it to hold you in place. 

>  If the latter, would the Lad-Saf be connected to the 
chest D-ring or to the back D-ring? 

    Chest D-ring. You don't want to slide down very far in this 'natural' 
position.

>  If the Lad-Saf is connected to the 
front D-ring, does it need a lanyard there, or would I connect the front 
D-ring directly to the carbiner on the Lad-Saf?

    If the front D-ring to trolley distance gives you enough room to climb 
comfortably, then it's fine. Putting a locking carabiner to add a little 
distance is standard. Just get it so it's comfortable for what you're doing. 

> If I need a "non-stretchy" lanyard as a positioning device, what is an 
appropriate length, taking into account that the tower tapers? Do I need 
to look for an adjustable lanyard that I can shorten as I move up the tower?

    An adjustable positioning lanyard is the best - then it fits ALL the 
towers you're working on. I use a 3'-6' adjustable Klein, they run about $120.

    As long as you're hooked up to something all the time, you'll be in good 
shape. After you've done it a couple of times, it'll be easier and more you'll 
be more confident. 

Cheers,
Steve    K7LXC
TOWER TECH -
Professional tower services for commercial and amateur
Cell: 206-890-4188
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>