Towertalk
[Top] [All Lists]

[TowerTalk] ]wire rope source for MA770 Tower

To: "'tom talbot'" <tom.talbot@bigpond.com>,<towertalk@contesting.com>
Subject: [TowerTalk] ]wire rope source for MA770 Tower
From: "Kevin Adam" <n9iww@verizon.net>
Reply-to: n9iww@verizon.net
Date: Sat, 23 Jul 2005 08:55:58 -0500
List-post: <mailto:towertalk@contesting.com>
Here is a good wire rope source for new cable they even have ss steel to.
http://www.farmtek.com

N9IWW



-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of tom talbot
Sent: Saturday, July 23, 2005 5:30 AM
To: towertalk@contesting.com
Subject: [TowerTalk] MA770 Tower

Thanks to tower talk I have found that I have a MA770 tower with an electric
winch, Unfortunately the wire rope was cut in sever places when it was
disassembled. I desperately need a wire rope weaving diagram can any one
help??.US towers the manufactures say they cant help due to litigation
though  they did send some photos 73 Tom VK6TH
_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>